Retail pre-orders require full payment at checkout. Existing wholesale payment terms continue to apply. Estimated dispatch: late November 2026. Your dispatch date is not confirmed and may change because of production, quality-control or logistics delays.
Your whole order will ship together when all items are ready. Place separate orders if you want available items dispatched earlier; separate shipping charges may apply.
Delivery estimates begin after dispatch, not from the date you place your pre-order. We will email you if the dispatch estimate changes. Your statutory cancellation and refund rights are unaffected.
Read the pre-order shipping termsVS4 · 53 mm conical burrs
An iridescent titanium upgrade set made for the 53 mm conical VS4 platform. Choose the grinder-specific set when exploring a different burr finish.
VS4 / HYPERNOVA IRIDESCENT TITANIUM
Hypernova Iridescent Titanium pairs its distinct cutting geometry with an iridescent titanium finish. The supplied VS4 reports show how its particle distribution changes across three measured grind settings at 150 RPM.
This set is an optional upgrade for VS4. Its finish and cutting geometry are part of the choice; a coating colour alone does not establish how a coffee will taste.
Dial in each set with the same coffee, water and brew method. Keep dose and yield consistent for espresso, or coffee-to-water ratio for filter. Compare sweetness, clarity, body and finish, then change one variable at a time.
The laser reports show particle sizes at the tested settings and speeds. D10, D50 and D90 mark the sizes below which 10%, 50% and 90% of the measured volume fall.
This set was measured at settings 3, 6 and 10 at 150 RPM. The supplied reports do not include tests at 200, 250 or 300 RPM for this set.
Use the measurements as a reference alongside tasting. Dial settings depend on the fitted burrs and calibration; the report describes the coffee and test conditions used.
VS4 · Measured burr performance
Choose your burr set, grind setting and measured speed. Explore the distribution, compare results and inspect the original measurements.
Loading measured results…
Compare speeds using the same burr and setting, or compare available burr reports at the same setting and speed. Dial settings are specific to each fitted burr set. The figures and table below describe the selected report.
These reports use different particle-size intervals, so comparison is shown as cumulative volume.
Percentages are by volume. Dial settings are specific to the fitted burrs. These laboratory measurements do not predict a particular flavour.
The original report link is not available for this archived measurement. Its recorded values are shown below.
| Particle interval (µm) | Volume % | Cumulative % |
|---|
| Grind setting | Speed (RPM) | D10 (µm) | D50 (µm) | D90 (µm) |
|---|---|---|---|---|
| 3 | 150 | 36.49 | 250.6 | 523.3 |
| 6 | 150 | 66.53 | 417 | 768.7 |
| 10 | 150 | 117.3 | 521.3 | 930.9 |
These 53 mm conical sets are made for VS4. VS3 38 mm burrs and VS6 58 mm flat or 63 mm conical burrs are separate platforms and are not interchangeable with VS4.
Unsure which set suits your setup? Tell us your grinder, coffee, roast, brew method and the change you want in the cup. We can help you choose a starting point and a practical dial-in approach.
Ask about VS4 burrs →VS4 / 53 MM CONICAL
Explore three optional coated burr sets for your VS4.
VS4 · 53 mm conical
Gold titanium · optional upgrade
US$ 59.00 USD
PRE-ORDER · Pre-orders are now open. Estimated dispatch: late November.
Explore Supernova Gold Titanium
VS4 · 53 mm conical
Iridescent titanium · optional upgrade
US$ 79.00 USD
PRE-ORDER · Pre-orders are now open. Estimated dispatch: late November.
Explore Hypernova Iridescent Titanium
VS4 · 53 mm conical
Diamond-like carbon (DLC) · optional upgrade
US$ 99.00 USD
PRE-ORDER · Pre-orders are now open. Estimated dispatch: late November.
Explore Kilonova DLC