VS6 · 63 mm conical burrs
A 63 mm conical set with an iridescent titanium finish. Hypernova offers a starting point for exploring clarity while retaining body across espresso and filter recipes.
VS6 / HYPERNOVA
Espresso and filter, balancing clarity and body.
A 63 mm conical set with an iridescent titanium finish. Hypernova offers a starting point for exploring clarity while retaining body across espresso and filter recipes.
These profiles describe the design intention. Coffee, roast, grind setting and brewing method shape the result. Keep the dose and water consistent, then dial in the new set by taste.
This 63 mm conical burrs set is designed for VS6. The grinder supports 58 mm flat and 63 mm conical formats; choose the complete compatible set for the geometry you want to explore.
Recheck the reference setting and dial in after fitting another set. Follow the VS6 instructions for the selected format.
Get help with compatibilityVS6 · Measured burr performance
Choose your burr set, grind setting and measured speed. Explore the distribution, compare results and inspect the original measurements.
Loading measured results…
Compare speeds using the same burr and setting, or compare available burr reports at the same setting and speed. Dial settings are specific to each fitted burr set. The figures and table below describe the selected report.
These reports use different particle-size intervals, so comparison is shown as cumulative volume.
Percentages are by volume. Dial settings are specific to the fitted burrs. These laboratory measurements do not predict a particular flavour.
The original report link is not available for this archived measurement. Its recorded values are shown below.
| Particle interval (µm) | Volume % | Cumulative % |
|---|
