VS6 · Measured burr performance
See what changes in the grind.
Choose your burr set, grind setting and measured speed. Explore the distribution, compare results and inspect the original measurements.
Loading measured results…
How to read this chart
- Cumulative volume
- The percentage of measured volume below a given particle size. Use this view to compare reports with different interval widths.
- Volume per interval
- The percentage of measured volume within each particle-size interval. The interval width affects the height shown.
- D10, D50 and D90
- The sizes below which 10%, 50% and 90% of the measured volume fall. D50 is the median by volume.
Compare speeds using the same burr and setting, or compare available burr reports at the same setting and speed. Dial settings are specific to each fitted burr set. The figures and table below describe the selected report.
These reports use different particle-size intervals, so comparison is shown as cumulative volume.
Percentages are by volume. Dial settings are specific to the fitted burrs. These laboratory measurements do not predict a particular flavour.
Measurement details and values
Open the original reportThe original report link is not available for this archived measurement. Its recorded values are shown below.
| Particle interval (µm) | Volume % | Cumulative % |
|---|