VS3 · Conical burr set
Pre-crushing teeth and a plasma finish define the ULTRA approach. Start with a familiar coffee and compare how the change in burr geometry responds through the recipe.
VS3 / HYPERNOVA ULTRA
Espresso and filter, with clarity and balanced body.
Pre-crushing teeth and a plasma finish define the ULTRA approach. Start with a familiar coffee and compare how the change in burr geometry responds through the recipe.
These profiles describe the design intention. Coffee, roast, grind setting and brewing method shape the result. Keep the dose and water consistent, then dial in the new set by taste.
This set is designed for VS3. A Gen 1 grinder requires a different-size bearing when fitting a Gen 2 burr set. Contact Varia with your order number so the correct bearing can be included.
A VS3 setting is a reference for the fitted burrs. Check zero and dial in again after changing the set, following the VS3 manual.
Get help with compatibilityVS3 · Measured burr performance
Choose your burr set, grind setting and measured speed. Explore the distribution, compare results and inspect the original measurements.
Loading measured results…
Compare speeds using the same burr and setting, or compare available burr reports at the same setting and speed. Dial settings are specific to each fitted burr set. The figures and table below describe the selected report.
These reports use different particle-size intervals, so comparison is shown as cumulative volume.
Percentages are by volume. Dial settings are specific to the fitted burrs. These laboratory measurements do not predict a particular flavour.
The original report link is not available for this archived measurement. Its recorded values are shown below.
| Particle interval (µm) | Volume % | Cumulative % |
|---|
